Forward Lift Website Background Image





Request More Info

Home > Car Lifts > 2 Post Lifts > DP10A Two Post Lift
  • DP10A Two Post Lift Forward Lift
  • F10 Two Post Spot-Rite™ Arm Features
  • DP10A Two Post Lift Forward Lift Arms

DP10A Two Post Lift Features:

Low-Profile Design:
The DP10A features low-profile/oversized pads with multiple extensions to raise most vehicles on the road today. Includes four of each of the following extensions: 1.75", 3.5", and 5".
Spot-Rite™ 3-Stage Front Arm Design:
The DP10A features offset arms to accommodate vehicles both symmetrically and asymmetrically. This feature allows the technician to position the vehicle doors in front of or behind the column to prevent door damage.

Additional Features:
  • 10,000 lbs. capacity for raising most passenger cars, trucks and vans.
  • Direct-Pull Lifting - high efficiency, low maintenance technology
  • Closed loop hydraulic system - preventing hydraulic contamination
  • Powder coat, oven baked finish - more durable than conventional coatings
  • Third party tested by ETL and certifed by ALI
  • Padded shut-off bar
  • Spring operated arm restraints, disengage at floor level
  • Low profile arms
  • Single point release lock in each column, resets on upstroke
  • Optional high rise and extended height available
  • Door bumpers included

DP10A Spot-Rite™ 3-Stage Front Arm Design vs Standard 3-Stage Front Arms

I10 Spot-Rite™ Arm Design

Spot-Rite™ 3-Stage

  • Preferred Drive-in Arm Position
  • Front arms fold parallel to rear arms for clear vehicle drive-thru space
  • Arms swing to vehicle pick up points without front tire interference
  • Improve technician productivity with easy to spot arms
  • Spotting maneuverability improvment from the same side of column
I10 Spot-Rite™ Arm Design Standard Two Post Lift

Standard 3-Stage Arm Design

  • Restricted Drive-in Arm Position
  • Front arms do not fold parallel to rear arms next to column
  • Arms may interfere with vehicle at certain points.
  • Car must be placed more precisely to clear front tires - may require additional tech time to reposition vehicle.

The DP10A 2-post lift comes standard with offset, three-stage front arms. These arms fold parallel to the rear arms during vehicle drive-in . This allows them to be set in an asymmetric lifting position, behind the front tires during vehicle drive-in. The vehicle's lifting points can be easily and quickly spotted without having to reposition the vehicle back and forth to reach it's manufactur's lift points.

Automotive Lift Institute Logo
Shown: DP10AN200
Capacity: 10,000 lbs.

Standard lift colors include blue and red.

Capacity Per Arm2500 lbs. (1134kg)
Overall Height143-3/8" (3642mm)
Overall Height with Extension160-3/4" (4083mm)
Minimum Ceiling HeightMinimum Ceiling Height 144" (3658mm)
Minimum Ceiling Height With Extension167" (4242mm)
Minimum Adapter Height3-5/8" (93mm)
Maximum Lifting Height76" (1930mm)
Maximum Lifting Height (High Rise Model)79-1/2" (2019mm)
Adapter Extension Heights (stack Type)1-3/4" (45mm), 3-1/2" (90mm), and 5" (120mm)
Front Arm Reach23"- 44-1/2" (584mm - 1130mm)
Rear Arm Reach38-1/2"- 58" (978mm - 1473mm)
Overall Floor Width136.5" (3467mm) or optional 131.5" (3340mm)
Inside Column Width114-1/2" (2908mm) or optional 108-1/2" (2756mm)
Drive Through104-1/2" (2654mm) or optional 98-1/2" (2502mm)

Two Post Accessories

F10 Two Post Adapter Extensions

Adapter Extensions

Part # 1070922 - 1.75"
Part # 1070923 - 3.5"
Part # 1070924 - 5"

Two Post Lift Accessories

Air / Electric Utility Box

Part # 991359

F10 Two Post Truck Adapters


Adjustable Frame Engaging Adapters

Part # T100285 (Set of 4)



Forward Lift®

News Room


  • Toll Free:
  • 812-273-7325

© Vehicle Service Group, All Rights Reserved. Unless otherwise indicated, Forward Lift® and all other trademarks are property of Dover Corporation and its affiliates.