Four Post Lift CR14

CR14 Series Features:
  • 14,000 lbs. capacity
  • Heavy duty hydraulic cylinder
  • Single Point latch release system
  • Jack track is standard feature
  • Multiple position latch points in each structural leg
Optional Accessories:
  • 7,000 lbs. capacity rolling bridge jacks
  • Drive Through ramps optional
  • Internal airline kit
  • Turning radius gauges
  • Power unit cover
  • 3-phase motor
Two Post Lift CR14

Optional Accessories:

  • 7,000 lbs. capacity rolling bridge jack (shown below)
  • Optional Drive through ramps
  • Turning radius gauges
  • Power unit cover
  • 3-phase motor
Rolling Jack

Specifications CR14
Capacity 14,000 lbs. (6350kg)
Rise 75-3/4"(1924.05mm)
Maximum Wheelbase 176" (4470.4mm)
Maximum 2-Wheel Alignment 161" (4089.4mm)
Maximum 4-Wheel Alignment 155" (3937mm)
Overall Length 254" (6451.6mm)
Overall Width 137-1/4" (3486.15mm)
Width Inside Columns 114-1/4" (3661.156mm)
Length Between Columns 189-1/4" (4804.15mm)
Overall Height 88-3/4" (2254.25mm)
Runway Width 20" (508mm)
Runway Height 7" (177.8mm)
Width Between Runways 43" (1092.2mm)
Rise Time 65 seconds
Voltage* 208/230v
Amps 20
Motor 2HP
Minimum Bay Size 180" x 312" (4572mm x 7925mm)
* single phase standard; 3-phase available at additional cost
Standard lift colors include blue and red.
(Specifications subject to change without notice or liability)

The CR14 lift is certified by ALI (Automotive Lift Institute) to meet American National Standard