Four Post Lift OR14

OR14 Series Features:
  • Open front design
  • 14,000 lbs. capacity
  • Heavy duty hydraulic cylinder
  • Rear wheel slip plates
  • Internal airline standard
  • Front work step standard
Optional Accessories:
  • 7,000 lbs. capacity rolling bridge jacks
  • Drive Through ramps optional
  • Turning radius gauges
  • Power unit cover
  • 3-phase motor
Two Post Lift OR14

Optional Accessories:

  • 7,000 lbs. capacity rolling bridge jack (shown below)
  • Optional Drive through ramps
  • Turning radius gauges
  • Power unit cover
  • 3-phase motor
Rolling Jack

Specifications OR14
Capacity 14,000 lbs. (6350kg)
Rise 75-3/4"(1862.83mm)
Maximum Wheelbase 192-1/2" (4889.5mm)
Maximum 2-Wheel Alignment 188" (4775.2mm)
Maximum 4-Wheel Alignment 158" (4013.2mm)
Overall Length 264" (6705.6mm)
Overall Width 139" (3530.6mm)
Width Inside Columns 117-1/2" (2984.5mm)
Length Between Columns 205" (5207mm)
Overall Height 95-3/16" (2417.76mm)
Runway Width 20" (5207mm)
Runway Height 7" (177.8mm)
Width Between Runways 43" (1092.2mm)
Rise Time 65 seconds
Voltage* 208/230v
Amps 20
Motor 2HP
Minimum Bay Size 180" x 312" (4572mm x 7925mm)
* single phase standard; 3-phaseavailable at additional cost
Standard lift colors include blue and red.
(Specifications subject to change without notice or liability)

The OR14 lift is certified by ALI (Automotive Lift Institute) to meet American National Standard