Low Rise Lift 7000TL

10000TL Series Features:
  • 10,000 lbs. capacity
  • Drive-over ramps and side rails provide the width to support wider vehicles while approaching and exiting the lift
  • Dual lifting cylinders provide the power required to lift a 10,000 lbs. vehicle
  • The 10000TL comes with four 3-position adapters, four 3" rubber blocks and four 1-1/2" rubber blocks for added height
Click Here To Recieve More Information
Low Rise Lift 7000TL

The 10000TL comes with four 3-position adapters, four rubber blocks, and four 1-1/2" rubber blocks for added height.

Block Adapters
Rubber Blocks

Specifications 10000TL
Capacity 10,000 lbs. (4536kg)
Length Overall 90-1/2" (2299mm)
Width Overall 78-1/2" (1994mm)
Width Between Platforms 22-3/4" (578mm)
Length of Platforms 51-1/4" (1301mm)
Length of Pad 17" (7239mm)
Outside Width of Platforms 70-3/4" (432mm)
Horizontal Movement (during rise) 16" (406mm)
Collapsed Heigh 4" (102mm)
Locking Leg Heights 13-3/8" (340mm), 17-3/8" (441mm), 21-3/8" (543mm)
Voltage* 115v
Time of Full Rise 40 seconds
Rise High Step 30-5/16" (770mm)
Rise Mid Step 28-5/16" (719mm)
Rise Low Step 26-5/16" (668mm)
Rise Tall Pad 24-3/4" (627mm)
Rise Short Pad 23-1/4" (591mm)
Rise Flat 21-3/4" (552mm)
* single phase standard; 3-phase available at additional cost
Standard lift colors include blue and red.
(Specifications subject to change without notice or liability)

The 10000TL lift is certified by ALI (Automotive Lift Institute) to meet American National Standard